Linksys Support
- Welcome Back,
- Not
- ?
- Sign In
- My Support
- Sign In
Register Your Products Now
Register your Cisco Home product to stay informed about product updates and warranty information.
Instant Wireless Network Access Point (WAP11)
• Bridge multiple wired networks in rooms, floors, or buildings
• Highly efficient antennas provide excellent range of operation
• Long operating range up to 1150 feet outdoors
• Up to 256-bit WEP Security
View User Guide
Support Sections
Guide Me provides step-by-step solutions and troubleshooting tips. FAQs are frequently asked product questions. Select Downloads for user guides and firmware updates.
- Overview
- Guide Me
- FAQs
- Product Information
- WAP11 FAQ
- Setting up your access point
- Configuring an Access Point as an Access Point
- Connecting an access point to a wireless router
- Checking the Wireless Settings on a Linksys Access Point
- Connecting a Wireless PC on a Access Point
- Setting-Up 64-Bit WEP Wireless Security on a Access Point
- Setting up WEP, WPA or WPA2 Personal on a Linksys Access Point
- Setting-Up Wireless Security on an Access Point
- Advanced Troubleshooting
- Advanced Configuration for WAP11
- Accessing the access point’s web-based setup page
- Encountering difficulties in accessing the access point’s web-based setup page
- Resetting the access point to factory defaults
- Encountering intermittence or difficulties with wireless devices using a Linksys access point
- Encountering Blinking Power LEDs in a Access Point
- Product Information
- WAP11 FAQ
- Setting up your access point
- Configuring an Access Point as an Access Point
- Connecting an access point to a wireless router
- Checking the Wireless Settings on a Linksys Access Point
- Connecting a Wireless PC on a Access Point
- Setting-Up 64-Bit WEP Wireless Security on a Access Point
- Setting up WEP, WPA or WPA2 Personal on a Linksys Access Point
- Setting-Up Wireless Security on an Access Point
- Connecting a Linksys Access Point Using Mac OS X
- Advanced Troubleshooting
- Advanced Configuration for WAP11
- Accessing the access point’s web-based setup page using Mac computer
- Encountering difficulties in accessing the access point’s web-based setup page
- Resetting the access point to factory defaults
- Encountering intermittence or difficulties with wireless devices using a Linksys access point
- Encountering Blinking Power LEDs in a Access Point
- Forums
-
Limited or no connectivity to WAP11 while using WEP
Setting up my wifi network with an old BEFSR41 Router and WAP11 wireless access point. Have laptop with XP Pro that connects...
-
Tracking Intruders
You may also put a unique SSID name, then disable the SSID broadcast. That should prevent further intrusion?.
-
Tracking Intruders
Set your wireless security to WPA2 with AES and a strong passphrase. If you do that, there are no intruders. There are only...
-
Connecting to Wireless Network
Hey, I've been having a ton of problems with fixing my connection with my wireless network. A few months ago, I lost...
-
WAP11 access point - setting will not save
Ok I tried a different idea. I dowloaded the software from the linksys website instead of installing it from the CD I got...
-
WAP11 vs WET11
Okay if you want to connect WAP11 in bridge mode, on the other end it should be WAP11. however for WET11 you don't require...
-
WAP11
You normally use any ports 1 through 4. Depends on how your using it though. If you want to add the ability for wireless...
-
WAP11
I had the same problem when installing the utility in XP and 2000. This is how I solved the problem:Unplug the WAP11...
-
WAP11 keeps dropping signal
If you've encountered the problem just recently, changing the channel is the least you could do. you may also consider upgrading...
-
WAP11 setup trouble
Hi....here is what you can try .....assign a static IP to your PC first....to do so...from the control panel , go to network...
-
Upgrading to G
I am thinking of replacing my older linksys router (BEFW11S4) and access point (WAP11) with the WRT54G and WAP54G -- how...
-
WAG320N Static Route
Again: the WAG320N does not support this kind of setup. It does not allow you to define directly delivered static routes...
-
E4200 Static IP Issues
Haha! Oh man! Late nights just aren't good. I realized my error in the morning. I had previous used the Advanced Routing...
-
IP address? DHCP?
The AM200 is router with integrated modem. That's the main problem. I would recommend only to use a single router.Two recommended...
-
Problem: 13-digit WEP key
I finally figured it out on my own, so this can be marked as solved. I was assuming the 13-digit WEP code was a hex...
-
Cannot renew ip address
Un-install the adapter software/linksys monitor and install only the drivers... Remove the Linksys Adapter and un-install...
-
Monitoring channels/signal strength
This generally requires two devices. One transmitting a signal and one receiving the signal. Until now we have a WRT54GL....
- Downloads
-
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your product. The serial number is located right underneath the model number. In this example, the model number of the device is M20.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
E-Series
Step 1:
Look at the top of the device.Step 2:
The model number should be found under the CISCO logo.NOTE: The images may vary depending on the exact model number of your Linksys product. The serial number is located underneath the device. If there is no version number beside the model number, it means that it is a version 1.
-
Blue and Black
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is WRT54G ver 6.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
Silver
Step 1:
Look at the side panel of the router when it is standing vertically.Step 2:
You should find the model number on the sticker. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRT54GX4.
-
Wireless Routers with Voice Ports
Step 1:
Look at the side panel of the router when it is standing vertically.Step 2:
You should find the model number on the sticker. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRTP54G V.2.
-
Wireless VPN Routers
Step 1:
Look at the side panel of the router when it is standing vertically.Step 2:
You should find the model number on the sticker. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WRV54G.
-
Blue and Black
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is BEFSR41 ver.4.1.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
PC Card or Card Bus
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.Step 2:
You should find the model number on the device itself. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WPC54G ver.7NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
PCI Adapter
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.Step 2:
You should find the model number on the device itself. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WMP54G ver.4.1.
-
USB Wireless Adapter
Step 1:
Look for the sticker around the device.Step 2:
You should find the model number on the sticker. Please see the example.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number is WUSB54G ver.4.
-
PCI Adapters
Step 1:
If your adapter is already connected to the computer, shut down your computer and remove the adapter.Step 2:
You should find the model number on the device itself. Please take note of the exact model number and version. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
SE Switches
Step 1:
Look at the top of the device.Step 2:
The model number should be found under the CISCO logo.Step 3:
Take note of the exact model number and version of your product. The serial number is located underneath the device. In this example, the model number of the device is SE1500.NOTE: The images may vary depending on the exact model number of your Linksys product. If there is no version number beside the model number, it means that it is a version 1.
-
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is NMH410.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
-
Step 1:
Flip the device over.Step 2:
You should find the model number on the sticker underneath the device. Please see the example.Step 3:
Take note of the exact model number and version of your Linksys device. The serial number is located right underneath the model number. In this example, the model number of the device is DMC250.NOTE: The images may vary depending on the exact model number of your Linksys Product. If there is no version number beside the model number it means that is version 1.
- Videos
- Live Chat
Guide Me
Get quick solutions and troubleshooting tips.
Hot Topics
Frequently asked questions
Frequently Asked Questions for various Operating Systems
Forums
Downloads
Please ensure you select the correct hardware version as not all downloads are compatible with your device.
Free Software notice for certain products, click here.
How to find your model or serial number
To find model or serial numbers, choose your device below.
VALET HOTSPOTS
WIRELESS ROUTERS AND ACCESS POINTS
WIRED ROUTERS
WIRELESS ADAPTERS
WIRED ADAPTERS
SWITCHES
MEDIA HUB
WIRELESS HOME AUDIO
Forums
-
Limited or no connectivity to WAP11 while using WEP
Setting up my wifi network with an old BEFSR41 Router and WAP11 wireless access point. Have laptop with...
-
Tracking Intruders
You may also put a unique SSID name, then disable the SSID broadcast. That should prevent further...
-
Tracking Intruders
Set your wireless security to WPA2 with AES and a strong passphrase. If you do that, there are no intruders....
-
Connecting to Wireless Network
Hey, I've been having a ton of problems with fixing my connection with my wireless network. A few...
Guide Me
Get quick solutions and troubleshooting tips.